top of page
formwork design temporary works design
formwork design temporary works design
formwork design temporary works design
formwork design temporary works design
 Relative Services

Timber Design // Backpropping Design  // Wind Calculations // Anchorage Fixing Assessment //  Structural Steel Section Assessment // Early Striking Time Analysis // Concrete Pressure & Rate of Rise Analysis // Feature Finish Tie Hole Optimisation // Formal Calculations // Cat. 3 Checks // Material List Take Offs

Falsework Design
formwork design falsework design
Formwork Design

Safety, time saving, and simplicity are key elements of every successful falsework design. To help you deliver these requirements Form First Ltd offers the full range of slab formwork solutions available on the market.

 

We are highly experienced to design beam falsework systems including: GASS, Multiprop, Alshor Plus, Dokaflex, Titan  used in combination with complementary beam selection such as: DU-AL, Albeam, Alform, Alsec, MPB24, GT24, H20, Shutter Beam, Aluma Beam, Aluma Stringer. Each of above can be designed as static towers or flying tables when crane utilization is not a concern.

 

For more regular and repetitive floor plans we recommend man handled panel systems such as Topec, Skydeck, Airodek ideal for almost all concrete frame building applications.

 

When shoring cannot be fixed at head or any supporting height need to be reached continuously the selection of birdcage solutions: Cuplok, Rapidshor or Kwikstage will be a premier choice.

 

Whatever you need to form, from basement foundations to bridge piers, from columns to curved walls Form First Ltd can provide suitable formwork design for any project.

 

We are competent to design in following panel systems: Trio, Domino, Rundflex, Logik 60, Logik 50, Logik 360, Framax, Alu Framax, Frami, Maxima, Minima.

 

We also offer wide range of traditional formwork solutions such as Vario, MkII, Superslim Soldiers with DU-AL, Alform aluminium beam components which can help you form complex or high quality F3 or F4 concrete finishes.

All above combined with MULTIFORM A-Frames, SB Frames or traditional raking props of all sort can also be used to create a single sided wall formwork finishes for basements and underground areas.

 

formwork design falsework design

Services

Working with key Temporary Works specialists we have gained in-depth product knowledge of almost every Temporary Works system available on the UK market. Check the product list below to see if we can help. In Form First Ltd we are passionate about finding right solution for every situation and are not deterred by a little challenge!

bottom of page